D1 Draper Headers & FD1 FlexDraper® Headers for Combines

FD1 CA 1 1170 400 80 s c1

NEXT LEVEL CROP RECOVERY PERFORMANCE

Most combine headers perform well in perfect harvesting conditions, but when was the last time you had perfect conditions? MacDon FlexDraper® and Draper Headers are designed to maximize productivity in the most challenging harvesting situations, from our Active Float System that keeps our headers true-to-the-ground, to the outstanding performance of our reel. Available in sizes up to 13.7 m (45’), MacDon combine drapers are built tough to deliver worry-free harvesting performance with any crop, in any, any condition, and on any combine.

 

D1 Draper Header Specs

Size*25’ (7.6 m)30’ (9.1 m)35’ (10.7 m)40’ (12.2 m)45’ (13.7 m)
Weight** Single Knife Drive with FM100 6240 lb (2830 kg) 7210 lb (3270 kg) 7695 lb (3490 kg) - -
Weight** Double Knife Drive with FM100 - - - 8170 lb (3706 kg) 8460 lb (3837 kg)
Knife: Type / Drive / Speed

Single or double knife (depending on size and application) / Hydraulic, MacDon design enclosed oil bath Wobble Box(es) / Single knife combine 1050 to 1400 spm, double knife combine 1100 to 1700 spm (speed varies depending on header size, faster knife speed on smaller headers or double knife headers)

Guard Types Available

Pointed DHT (double heat-treated), stub SM (sheet metal hold-down, forged bottom guard), stub F (forged top and bottom)

Reel: Type / Drive / Speed / Fingers

Pick-up reel, five or six bat, two-piece (double) or single, flip-over design, cam-leading finger control / Hydraulic / Combine 0 to 67 rpm (varies depending on combine model) / HD plastic, 152 mm (6”) spacing, 279 mm (11”) length

Conveyor: Type / Drive / Speed / Delivery

1057 mm (41.6”) wide 680.4 g (24 oz) rubber skim-coated drapers, reversible double V-guide with tracking, integral seal on leading edge / Combine 0 to 194 m/min (0 to 636 ft/min) / Mechanical deck shift, opening width 1539 mm (60.6”) to 1948 mm (76.7”)

Field-Installed Options

Upper cross auger, stabilizer wheels, in-cab side draper speed control, slow speed transport, lateral tilt automatic header height control

*Product size availability varies by market

**All listed weights are approximations and will vary depending on header configuration. Check with your dealer for combine ratings. Weight includes FM100 Combine Adapter. The FM100 Combine Adapter weighs approximately 2400 lb (1089 kg); this number varies by combine model.

 

FD1 FlexDraper® Specifications

Size30’ (9.1 m)35’ (10.7 m)40’ (12.2 m)45’ (13.7 m)
Weight* Single Knife Drive with FM100 7460 lb (3384 kg) 7760 lb (3520 kg) 8230 lb (3733 kg) -
Weight* Double Knife Drive with FM100 - - 8370 lb (3797 kg) 8800 lb (3992 kg)
Knife: Type / Drive / Speed / Guards

Single or double knife / Hydraulic, MacDon design enclosed oil bath wobble box(es) / 1050 to 1400 spm, varies depending on header size / Pointed DHT (double heat-treated), strong, mud resistant profile

Reel: Type / Drive / Speed / Fingers

Pick-up reel, 2-piece (double), flip-over design, cam-leading finger control / Hydraulic / 0 to 67 rpm varies depending on combine model / 279 mm (11”) length, wear-resistant HD plastic, 102 mm (4”) spacing

Conveyor: Type / Drive / Speed

1057 mm (41.6”) width, reversible 680.4 g (24 oz) rubber skim-coated drapers, double V-guide with tracking, integral seal on leading edge / Hydraulic / 0 to 194 m/min (0 to 636 ft/min) (Depending on combine model)

Standard Features

Adapters for most current model combines, hydraulic fore-aft reel positioner, hydraulic header tilt, cutterbar poly wear plates, auto-header height with header angle and ground pressure indicators

Field-Installed Options

Upper cross auger, stabilizer wheels, in-cab side draper speed control, slow speed transport, lateral tilt automatic header height control

*All listed weights are approximations and will vary depending on header configuration. Check with your dealer for combine ratings. Weight includes FM100 Combine Adapter. The FM100 Combine Adapter weighs approximately 2400 lb (1089 kg); this number varies by combine model.

 

FM 100 Float Module Specifications

Center DraperFeed Auger
Size 2000 mm (78.7”) width 1660 mm (65.3”) width
Weight

Approximately 2400 lb (1089 kg), varies by combine model

Type

Self-tracking, rubber-coated polyester fabric feed draper with rubber slats, hydraulic drive (reversible)

Floating auger, mechanical drive (reversible), removable retracting fingers with full-retraction when reversing

Speed

107-122 m/min (350 to 400 ft/min)

185-206 rpm, varies with combine model

Header Flotation: Type / Vertical Range / Lateral Range (tilt)

Two pairs of coil springs, independent adjustment, transport lock-out / 178 mm (7”) / 4.8 degrees

Have A Question?

Contact us, we want to hear from you!