- Home
-
Inventory
- Advanced Search
-
Used Equipment
- Browse All Used
- Bargain Cave
- Certified Pre-Owned
- Used Tractors
- Used QuadTrac
- Used Combines
- Used Forage Harvester
- Used Corn Headers
- Used Draper Headers
- Used Flex Headers
- Used Grain Carts
- Used Big Square Balers
- Used Round Balers
- Used Mower Conditioners
- Used Planters
- Used Skid Steer Loaders
- Used Lawn Mowers
- Skid Steer Attachments
- Skid Steer Buckets
-
New Equipment
- Browse All New
- New Mahindra Tractors
- New Exmark
- New Ariens / Gravely
- New Krone
- New Bad Boy
- New Tractors
- New Compact Tractors
- New Combines
- New Forage Harvester
- New Corn Headers
- New Big Square Balers
- New Round Balers
- New Disc Mowers
- New Mower Conditioners
- New Planters
- New Skid Steer Loaders
- New Lawn Mower
- New Skid Steer Attachments
-
New Products
- Case IH
- Case
- New Holland Ag
- New Holland Light Construction
- Mahindra Tractors
- Exmark
-
Echo
- Accessories
- Bed Redefiners
- Blowers
- Brushcutters
- Chain Saws
- Chipper/Shredders
- Cordless Products
- Cut-Off Saws
- Earth/Ice Augers
- Edgers
- Engine Drills
- Fire Pump
- Generators/Inverters
- Hand Tools
- Hedge Trimmers
- Pressure Washers
- Pro Attachment Series
- Pruners
- Shred 'N' Vac
- Speed-Feed
- Sprayers
- Spreaders
- Tillers/Cultivators
- Trimmers
- Wheeled Trimmers
- MacDon
- Krone
- Kuhn
- Ariens / Gravely
- Woods
- Bad Boy Mowers
- Brent
- Get a Quote
- Departments
- Toys & Merchandise
- Our Company
- Careers
-
- Home
-
Inventory
-
Used Equipment
- Browse All Used
- Bargain Cave
- Certified Pre-Owned
- Used Tractors
- Used QuadTrac
- Used Combines
- Used Forage Harvester
- Used Corn Headers
- Used Draper Headers
- Used Flex Headers
- Used Grain Carts
- Used Big Square Balers
- Used Round Balers
- Used Mower Conditioners
- Used Planters
- Used Skid Steer Loaders
- Used Lawn Mowers
- Skid Steer Attachments
- Skid Steer Buckets
-
New Equipment
- Browse All New
- New Mahindra Tractors
- New Exmark
- New Ariens / Gravely
- New Krone
- New Bad Boy
- New Tractors
- New Compact Tractors
- New Combines
- New Forage Harvester
- New Corn Headers
- New Big Square Balers
- New Round Balers
- New Disc Mowers
- New Mower Conditioners
- New Planters
- New Skid Steer Loaders
- New Lawn Mower
- New Skid Steer Attachments
-
New Products
-
Echo
- Accessories
- Bed Redefiners
- Blowers
- Brushcutters
- Chain Saws
- Chipper/Shredders
- Cordless Products
- Cut-Off Saws
- Earth/Ice Augers
- Edgers
- Engine Drills
- Fire Pump
- Generators/Inverters
- Hand Tools
- Hedge Trimmers
- Pressure Washers
- Pro Attachment Series
- Pruners
- Shred 'N' Vac
- Speed-Feed
- Sprayers
- Spreaders
- Tillers/Cultivators
- Trimmers
- Wheeled Trimmers
-
Precision Farming
- Get a Quote
-
Departments
-
Toys & Merchandise
-
Our Company
- Careers
Exmark LZE751GKA524A2
Double tap to zoom
LAZER Z E-SERIES LZE751GKA524A2
Overview:
The perfect choice for professional landscape contractors who want the innovative engineering and commercial-grade quality of a Lazer Z zero turn riding mower, but in a value package. It features the same welded, heavy-duty, 1.5”x 3” tubular steel unibody frame found throughout our Lazer Z models. You can also choose from two rugged Kawasaki® V-Twin engines or a Kohler® Command™ EFI engine matched to a full-floating, UltraCut™ Series 4 cutting deck, in 48, 52, 60 or 72 inch widths. A digital operator diagnostic module simplifies system monitoring and troubleshooting, while the fuel gauge uses ultrasonic waves to provide a more accurate reading. Comes equipped with a full-suspension seat that enhances operator comfort. - Less
The perfect choice for professional landscape contractors who want the innovative engineering and commercial-grade quality of a Lazer Z zero turn riding mower, but in a value package. It features the same welded, heavy-duty, 1.5”x 3” tubular steel unibody frame found throughout our Lazer Z models. You can also choose f... + Read More
-
Get a Quote
Get A Quote
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.
-
Request Brochure
Request Brochure
Fields with asterisks* are required.
-
Send to a friend
Send To A Friend
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
-
Payment Calculator
Loan Calculator
Use the Loan Calculator to help you determine the financing and payment options that are best for you.
**The accuracy of this calculator and its applicability to your circumstances is not guaranteed. You should obtain personal advice from qualified professionals. This information is provided for illustrative purposes only and does not constitute an application. This notice does not guarantee loan approval, nor is it an offer or commitment to make a loan to you on the above terms.
Share This Product:
Features
Hydro Drive, Simplified
Our hydro drive system has no hoses to leak and just one easy-to-change belt. Only simple, annual maintenance is required. It also lowers the center of gravity for improved handling.
Unibody Frame
Our one-piece body frame is a classic case of “less is more.” Because, fewer parts equal more strength. And, more durability. So, in the interest of accuracy, the Lazer Z’s unibody frame is actually a case of “less is way more.”
Less Time At The Pump
Gas-powered E-Series models have a single 8-gallon tank with one fill location.
On-Board Diagnostics
Check vital functions at a glance on the digital screen. An electronic fuel gauge with low fuel warning on all Lazer Z units, battery voltage warning, hour meter and OPC safety switch monitoring make troubleshooting easy.
Fewer Grease Points
With just four grease points that only need annual greasing, the Lazer Z delivers maximum performance with minimum maintenance. Greaseless spindles and only four grease points on the entire machine.
Ultracut Series 4 Deck
This full-floating deck uses maintenance free spindle with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.
Rear Discharge Deck
Available in 60 and 72 inch cutting widths, the rear discharge deck offers increased clipping discharge control, reduced noise, and the ability to trim on both sides of the cutting deck while keeping the operator clean.
Tool-less Belt Removal
Deck and hydro belt can be installed without using any tools.
Specifications
NOTES: N/A in California
Equipment | |
Blade Spindles | No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver. |
Drive Tires | 23 x 9.50-12, 4 ply Super Turf® |
Cup Holder | Standard |
Tractor Frame | Unibody, welded, heavy-duty 1.5" x 3" tubular steel. |
Steering Control | Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions. |
Front Caster Tires | 13 x 5.0-6, smooth-tread, semi-pneumatic. |
Parking Brake | Lever-actuated disc brake. |
Seat | Deluxe, bolstered suspension seat with Elastomeric Vibration Control material. Adjustment: Fore and aft from Operators’ Position. |
Electrical | 12-volt battery with 15-amp alternator. |
Power Components | |
Engine Brand | Kawasaki® |
Engine Model | FX751V |
Engine Displacement | 852 |
Engine Series | V-Twin |
Engine Type | Carbureted |
Engine Speed | 3,750 rpm |
Air Filter | Heavy-duty canister air filtration system |
Fuel Type | Gas Carbureted |
Fuel Capacity | 8-gallon (30.3-L) single fuel tank with single fill location. |
Fuel Indicator | Yes - electronic Sender |
Drive | Hydro-Drive |
Drive Description | Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors. |
Speed | Infinitely variable speed selection from 0–8.0 mph (12.9 kmph) forward, 0–5.0 mph (8.1 kmph) reverse. |
Carb Compliant | No |
Deck Lift | Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. |
Safety Package | Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators. |
ROPS | 2-post foldable ROPS standard with seat belt and latch. |
PTO Engagement | MagStop electromagnetic 200-ft-lb clutch with spot brake |
Drive Wheel Release | Allows unit movement without engine running. |
Casters | .50" thick caster yoke arms. |
Decks | |
Width / Cutting Deck | 52" |
Deck Style | Floating Deck |
Deck Style Description | Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. |
Deck Construction | 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight. |
Blade Tip Speed | Approximately 18,500 fpm. |
Cutting Heights | 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat. |
Blades | 3 Blades at 18.0" Length |
Dimensions | |
Width | 64.8 in. (164.6 cm) |
Length | 79.2 in. (201.2 cm) |
Height | 70 in. (177.8 cm) |
Have a question? Contact us, we want to hear from you.
Used Equipment
- Browse All Used
- Bargain Cave
- Certified Pre-Owned
- Used Tractors
- Used QuadTrac
- Used Combines
- Used Forage Harvester
- Used Corn Headers
- Used Draper Headers
- Used Flex Headers
- Used Grain Carts
- Used Big Square Balers
- Used Round Balers
- Used Mower Conditioners
- Used Planters
- Used Skid Steer Loaders
- Used Lawn Mowers
- Skid Steer Attachments
- Skid Steer Buckets
New Equipment
- Browse All New
- New Mahindra Tractors
- New Exmark
- New Ariens / Gravely
- New Krone
- New Bad Boy
- New Tractors
- New Compact Tractors
- New Combines
- New Forage Harvester
- New Corn Headers
- New Big Square Balers
- New Round Balers
- New Disc Mowers
- New Mower Conditioners
- New Planters
- New Skid Steer Loaders
- New Lawn Mower
- New Skid Steer Attachments
Locations
-
Hastings
18202 Nicolai Ave.
Hastings, MN 55033
651-437-4164
Get Directions
-
Kasson
601 8th St. SE
Kasson, MN 55944
507-634-4388
Get Directions
-
Northfield
32907 Northfield Blvd.
Northfield, MN 55057
507-645-6643
Get Directions
-
Adams
211 W. Main
Adams, MN 55909
507-582-3360
Get Directions
-
Plainview
400 10th St. SW
Plainview, MN 55964
507-534-3195
Get Directions
© Copyright Minnesota Ag Group, Inc. All Rights Reserved. 2019 - 2024 Site by MD EquipmentLocator.com