Krone EasyCut R 280

Double tap to zoom



EasyCut R 280 | R 320

  • Manual or hydraulic ground pressure control
  • Low-maintenance and frictional driveline without belts
  • KRONE SafeCut cutterbar protection is a standard feature
  • Cantilever guards ensure smooth crop flows


Are you looking for a powerful mower that works at a width of about 3 meters (9'10")? Then the KRONE EasyCut R 280 and R 320 disc mowers with DuoGrip system are for you. Their DuoGrip center-of-gravity suspension system with manual or hydraulic spring control, the unique impact damage protection system and the optimized cutterbar for stripeless cuts are just some of the selling points.

The EasyCut R 280 and EasyCut R 320 models use springs to provide suspension. The tension is adjusted manually or hydraulically as an option to optimize ground contour following at high work rates.

Covering the full width: EasyCut R 280 and EasyCut R 320 have adjustable lower link pins that allow the machine to run offset behind the tractor and cut at full width at any track width, on side slopes and in combination with a front mower.

Automatic folding: When the mower moves into transport position, the guard folds back to reduce the transport height. When the machines lowers into work position the guard, too, moves back into work position.

The trailer bed up/down service will do: A single-acting ram with accumulator is fine to raise the EasyCut R 280 and R 320 models into headland and transport position.

A unique KRONE design: The vertical storage position saves space in the machine shed. The optional stands give the machine good footing and are useful for attachment and removal. But of course EasyCut R 280 and EasyCut R 320 also store in horizontal position.


  EasyCut R 280
Work width                                     Approx. mm 2,730 (9')
Transport height                             Approx. mm 3,500 (11'6")
Upright transport position 110°
No. of discs 4
No. of drums 2
SafeCut Standard
Quick-change blades Standard
Standard pto speed                                    rpm 540
Optional pto speed                                      rpm 1,000
Dead weight                            Approx. kg (lbs) 780 (1,720)
Power requirement                   Approx. kW/hp 40 / 55
Mechanical pressure control Standard
Hydr. pressure control Option (1 da spool)
No. of required spools 1 sa
Link arm pins Cat II
Work rate                                     Approx. ha/h
3.0 - 3.5
(7.4 - 8.6)
  • case ih
  • case ce
  • exmark
  • gravley horizontal
  • krone
  • kuhn knight
  • macdon
  • mahindra
  • woods
  • brent