x
x

New Holland B95C TC

Double tap to zoom

 

Features

OPERATOR ENVIRONMENT

WELCOME ABOARD
A good cab will offer good operator comfort, excellent ergonomics and plenty of room to speed switching between loader and backhoe operation. A great cab will combine this with excellent all-round visibility, first class heating and ventilation with low noise and vibration levels. With the newly refreshed cab on New Holland backhoe loaders, you get all the small additional details that make the cab extra special. Room for tools and oddments as well as personal items. A high grip floor covering to help prevent the operator slipping when entering with muddy footwear. A powerful lighting package featuring up to ten optional LED lights giving true 360 degree light pattern thanks to the roof mounted side lights. Large retractable sunshades, cup holders, glove box and a deluxe pneumatic heated seat. To top it off, the engine exhaust pipe has been relocated to the right side of the cab to provide a clear view of the loader arm.

ERGONOMIC CAB DESIGN
• Improved in-cab storage
• Spacious cab allows easy seat transition to operate the backhoe
• A choice of entry level mechanical and deluxe heated pneumatic suspension seats are available
• Low 77dB(A) in-cab noise level
• Good visibility is a key design priority, C series backhoe loaders benefitting from extremely slim cab pillars, front and rear

REPOSITIONED EXHAUST
• A pillar exhaust mount for clear view of loader

OPTIMAL ENVIRONMENT
• Key controls mounted on side to allow operation from both forward and backhoe seat positions
• Uncluttered side console housing all necessary buttons
• The dashboard is easy to read with the seat in either its forward or reverse position
• Powerful heating and ventilation with standard air conditioning ensures operator comfort throughout the day
• Backhoe joystick towers adjust in all directions for the most comfortable position

MULTIFUNCTION LEVER
• Single multifunction proportional control lever for all loader controls
• 4 in 1 or 6 in 1 bucket opening, diff lock and transmission de-clutch functions are also activated from the lever

ALL ROUND VISIBILITY
• Up to ten LED work lights including roof mounted side lights are available
• Up and over rear window, light and easy to open and close

ENGINE AND CHASSIS

POWERFUL ECONOMY
Developing 98, 111hp dependent upon model, the FPT Industrial F5H 3.4 litre four-cylinder engine in backhoe loaders is the same unit proven in New Holland T5 tractors. Complaint with stringent Tier 4B emission regulations, the engines have an advanced throttle control system. This allows the operator to adjust how the engine responds to throttle inputs from smooth to fast.

POWERED BY FPT INDUSTRIAL
New Holland are not going it alone when it comes to Tier 4 technology, they can draw on the experience of their in-house engine development specialist: FPT Industrial.
Pioneers: Common Rail technology developed by FPT Industrial at their R&D excellence center in Arbon, Switzerland in the 1980s and brought it to the masses in 1997 on the Alfa Romeo 156. They were the very first to introduce it on agricultural machines on the TS-A tractor. Pioneering. Always.
Cleaner: For the eighth consecutive year, CNH Industrial has topped the Dow Jones Sustainability World and Europe Indexes for the Industrial Engineering sector. Cleaner. Everywhere.
Proven: FPT Industrial has pioneered SCR technology since 1995 and has already produced over 1 million SCR engines during the last eight years for the agricultural, construction and haulage industries. Reliability. Confirmed.

COMPACT HI-ESCR AFTER-TREATMENT EMISSION SYSTEM
New Holland sister company FPT Industrial developed the F5H engine to meet tough emission regulations without the need for a Diesel Particulate Filter. By combining proven Selective Catalytic Conversion with exhaust gas recirculation, an F5H engine can be operated at low loads for an extended period without needing to regenerate a blocking a DPF filter.

YOUR PERFECT WORKING PARTNER
• Output choice of 98 and 111hp
• New side mounted for exhaust stack for improved visibility
• Engine shut-down protection in the event of low oil pressure plus high coolant or transmission oil temperatures
• 132 litres fuel and 42 litre AdBlue capacity
• Three throttle settings, soft, normal and fast are offered. The operator can select the throttle setting best suited to the application

MORE TIME WORKING
• 600hr* engine service intervals
* when AMBRA UNITEK engine oil is used only

CHASSIS
All backhoe models benefit from a full frame chassis, its exceptional strength diverting all stress through the robust frame with no load on the engine or transmission.

• Robot welded full length frame chassis
• No stress on engine or transmission
• Plate reinforced stress points
• Cast backhoe slider interface
• Open design to facilitate maintenance

Specifications

B95C TC  
DIMENSIONS  
Transport length, ft/in (mm) 24’ 0” (7325)
Transport height, ft/in (mm) 12’ 6” (3815)
Wheelbase 2WD, in (mm) 85.6” (2175)
Wheelbase 4WD, in (mm) 85.6” (2175)
Height to top of cab, ft/in (mm) 9’ 5” (2870)
Ground Clearance, in (mm) 15.5” (394)
Blade width, ft/in (mm) 7’ 5” (2250)
Bucket Rollback At ground level 43˚
Bucket Rollback Raised Adjustable
Digging depth below grade, in (mm) 5” (120)
Transport width, ft/in (mm) 7’ 6” (2300)
Stabilizer spread, operating, ft/in (mm) 10’ 7” (3226)
Stabilizer spread, leveling angle 14˚
LOADER DIMENSIONS*  
Max operating height, ft/in (mm) 13’ 11” (4250)
Height to hinge pin, ft/in (mm) 11’ 4” (3458)
Dump height, ft/in (mm) 10’ 7” (3218)
Max dump angle 45˚
Reach @ 45 degree dump angle, ft/in (mm) 2’ 9” (829)
Max grading angle 116˚
LOADER PERFORMANCE*  
Linkage geometry curved
Bucket breakout force, lbf (daN) 14,711 (6544)
Lift capacity to full height, lbs (kg) 7,606 (3450)
SAE heaped capacity, cu yd (m³) 1.3 (1.0)
SAE struck capacity, cu yd (m³) 1.1 (.82)
Bucket weight, lbs (kg) 880 (399)
Cutting width, in (mm) 89 (2250)
Cycle - Raise to full height 3.70 sec
Cycle - Dump time 2.00 sec
Cycle - Lower 2.60 sec
WEIGHT
Base Unit (4WD, Cab) 17,730 (8042)
With options added 2WD -386 lbs
With options added Canopy -397 lbs
With options added 4x1 +770 lbs
With options added 6x1 +1,810 lbs
With options added Std. (counterweight) -700 lbs
With options added Med. (counterweight) -170 lbs
ENGINE  
Make and model F5BFL413B*B003
Type Tier 4 Final certified, Diesel Oxidation Catalyst with Urea Dosing Module and Selective Catalytic Reduction, HPCR, 4-cycle diesel
Aspiration Turbocharged Aftercooled
Rated RPM 2200 RPM
Number of cylinders 4
Displacement, cu in (l) 207 (3.4)
Horsepower, gross, hp (kW) 97 (72)
Horsepower, net hp (kW) 95 (71)
Peak torque, lb-ft (N-m) @ RPM 338 (458) @ 1400
TRANSMISSION  
Type Power Shuttle - Powershift
Manufacturer Carraro
Transmission type Synchromesh - Hydraulic clutch packs
Gear 4F/4R 4F/3R
Max Fwd travel speed, mph (kph) 22.5 (36.2) - 22.1 (35.5)
MANEUVERABILITY  
Brakes Less Brakes - With Split Brakes
2WD curb clearance 13’ 6” - 12’ 7”
4WD curb clearance 15’ 9” - 11’ 5”
2WD bucket clearance 17’ 9” - 16’ 8”
4WD bucket clearance 19’ 5” - 16’ 6”
BACKHOE DIMENSIONS  
Type Standard - Retracted - Extended
Max dig depth, ft/in (mm) 14’ 6” (4426) - 15’ 1” (4586) - 18’ 5” (5623)
Dig depth, 2’ flat bottom, ft/in (mm) 14’ 5” (4398) - 14’ 11” (4556) - 18’ 4” (5589)
Dig depth, 8’ flat bottom, ft/in (mm) 13’ 3” (4034) - 13’ 10” (4206) - 17’ 5” (5310)
Loading Height, ft/in (mm) 12’ 1” (3673) - 12’ 5” (3784) - 14’ 7” (4450)
Max pin height, ft/in (mm) 14’ 10” (4513) - 15’ 2” (4613) - 18’ 8” (5698)
Max operating height, ft/in (mm) 17’ 10” (5441) - 18’ 2” (5539) - 20’ 4” (6206)
Loading Reach @ max height, ft/in (mm) 4’ 6” (1362) - 4’ 10” (1461) - 7’ 5” (2272)
Dig reach @ max height, ft/in (mm) 6’ 8” (2040) - 7’ 3” (2208) - 9’ 11” (3019)
Bucket rotation (max) 203°
Reach from swing post, ft/in (mm) 17’ 0” (5186) - 17’ 6” (5327) - 20’ 7” (6279)
Reach (overall), ft/in (mm) 18’ 4” (5589) - 18’ 10” (5730) - 21’ 11” (6682)
BACKHOE PERFORMANCE  
Type Standard - Retracted - Extended
Bucket capacity, cu ft (m³) 7.5 (.21)
Bucket digging force, lbs (kg) 12,933 (5866)
Crowd digging force, lbs (kg) 8,588 (3895) - 8,100 (3674) - 5,782 (2623)
Boom lift @ -8 ft, lbs (kg) 3,228 (1467) - 2,732 (1242) - 2,329 (1058)
Dipper lift @ +10 ft, lbs (kg) 5,990 (2715) - 5,405 (2450) - 3,730 (1690)
HYDRAULIC SYSTEM  
Pilot Control Pump Variable displacement
System type Open center
Main pump type Dual gear
Pump capacity gpm (lpm) 40 (151)
System relief pressure 3,045 psi
ELECTRICAL  
Alternator output 160 amps
Battery capacity (std/opt) 1,200/900 CCA
REFILL CAPACITIES  
Fuel tank, gal (l) 34.6 (131)
DEF system, gal (l) 3.5 (13.2)
Cooling system, gal (l) 6.4 (24)
Engine oil, includes filter, gal (l) 2.1 (8.0 L)
Hydraulic tank, gal (l) 13.4 (50.7)
Hydraulic system, gal (l) 29 (111)
CYLINDER SPECS  
Loader cylinder 3.54” bore x 28.6” stroke
Backhoe - Boom cylinder 5” bore x 35.71” stroke
Backhoe - Arm cylinder 4.75” bore x 27.64” stroke
Backhoe - Bucket cylinder 3.5” bore x 30.16” stroke
Backhoe - Swing cylinder 4.33” bore x 9.38” stroke
SERVICE INTERVALS  
Engine oil 500 hours
Hydraulic oil filter 1,000 hours
Engine coolant 2,000 hours
Rear axle oil 1,000 hours
  • case ih
  • case ce
  • brand NHAG
  • brand NHCE
  • exmark
  • gravley horizontal
  • krone
  • kuhn knight
  • macdon
  • mahindra
  • woods
  • brent
  • badboy